Getting down to the final parts of the rolling chassis dismantling now.
I needed to prop the frame up with an old gas canister in order to
complete this task. Loosen off the fork tops before undoing the T
clamps. Just makes it easier in the long run. I started with the
removal of the front wheel (this is why you need to have the bike
propped up) but taking off the fork end caps.
Only loosen these clamps after you have loosened off the fork caps.
Then take off top T.
Top T.
Ignition key assembly bolt.
Unscrew steering head assembly.
And remove forks and bottom T in one go.
Check upper steering head bearing . .
and shell.
I must keep my little Canada sticker.